Skip to main content

Power model

A power model determines the power draw of a component based on its utilization. At the moment, power models are used by CPUs and GPUs. OpenDC defines 7 different models that map utilization to power draw. The default power model is a linear model with an idle power of 200W and a maximum power of 400W.

The type selects the model:

TypeFieldsPower draw
constantpowerA constant power of power, regardless of the utilization.
linearidlePower, maxPowerGrows linearly from idlePower at 0% utilization to maxPower at 100%.
squareidlePower, maxPowerGrows with the square of the utilization.
cubicidlePower, maxPowerGrows with the cube of the utilization.
sqrtidlePower, maxPowerGrows with the square root of the utilization.
mseidlePower, maxPower, calibrationFactorFitted to measurements, after Fan et al., ISCA 2007.
asymptoticidlePower, maxPower, asymUtil, dvfs (default true)Grows close to linearly above the utilization asymUtil, adapted from GreenCloud.

All power fields are Power values. idlePower can not be higher than maxPower.

Example​

"cpuPowerModel": {
"type": "sqrt",
"idlePower": "32 W",
"maxPower": "180 W"
}